NARAKU

NARAKU PERFORMANCE CLUTCH FOR GY6 150cc - 232cc

NARAKU PERFORMANCE CLUTCH FOR GY6 150cc - 232cc      OUTER DIAMETER: 120mmKEVLAR REINFORCED CLUTCH SHOESENGAGES 1500-2000 RPM HIGHER THAN A STOCK CLUTCH

NARAKU PERFORMANCE COIL FOR 50cc (QMB139) & 150cc (GY6)

NARAKU PERFORMANCE COIL  FOR 50cc (QMB139) & 150cc (GY6) FITS TAOTAO    NARAKU HIGH OUTPUT IGNITION COIL FOR 50cc TO 150cc GY6 4 STROKE ENGINE BASED...

NARAKU PERFORMANCE INTAKE SPACER *WITH O RING* FOR 50cc - 100cc QMB139 MOTORS

NARAKU PERFORMANCE 24mm INTAKE MANIFOLD SPACER FOR QMB139.   THIS SPACER IS DESIGNED TO OPTIMIZE FLOW FROM A 24mm INTAKE TO THE 21mm INLET PORTS ON THE NARAKU HEAD IN THE 52.4mm BIG BORE...

NARAKU PREMIUM 743-20-30 CVT DRIVE BELT FOR 150cc GY6 ENGINES 10" WHEELS

NARAKU PREMIUM 743-20-30 CVT DRIVE BELT FOR  SHORT CASE 125/150cc GY6 ENGINES WITH 10" REAR WHEEL.    NARAKU PREMIUM BELTS HAVE IMPROVED GRIP AND FLEX OVER THE STANDARD...

NARAKU PREMIUM 835-20-30 CVT DRIVE BELT FOR 150cc GY6 ENGINES 12-13" WHEELS

NARAKU PREMIUM 835-20-30 CVT DRIVE BELT  FOR LONG CASE 125/150CC GY6 ENGINES WITH 12" OR 13" REAR WHEEL.    LENGTH: 835mm TOP WIDTH: 20mm GROOVE ANGLE:...

NARAKU QUICK DRAW THROTTLE (7/8") QMB139 50cc & 150cc GY6 SCOOTERS

NARAKU PERFORMANCE QUICK THROTTLE IN CHROME FOR 50cc, 125cc & 150cc 2-STROKE & 4-STROKE SCOOTERS AND MORE! A GREAT OPTION TO CONVERT ATVS WITH THUMB THROTTLES TO A TWIST...

NARAKU RACING AC CDI WITH ADJUSTABLE TIMING FOR CUSTOM TUNING 50cc - 232cc

NARAKU RACING AC CDI WITH ADJUSTABLE TIMING FOR CUSTOMIZED TUNING ON  50cc - 232cc GY6 ENGINE BASED VEHICLES.   THE TIMING ADJUSTMENT SCREW IS SET IN THE MIDDLE FROM THE...

NARAKU SCOOTER PERFORMANCE BIG BORE CYLINDER & HEAD KIT *52.4mm*

NARAKU 50cc QMB139 4-STROKE 52.4mm, RACING BIG BORE CYLINDER AND HEAD KIT. KIT INCLUDES CYLINDER, PISTON, RINGS, PISTON PIN, CIR CLIPS, CYLINDER HEAD, HEAD GASKET, AND BASE GASKET.   WHEN...

NARAKU TORQUE SPRING BASE WITH 50cc JOG MINARELLI MOTORS

NARAKU TORQUE SPRING BASE FOR CLUTCHES  WITH JOG / MINARELLI MOTORS   NARAKU PERFORMANCE TORQUE SPRING BASE FOR 50cc OR 90cc MINARELLI 2-STROKE ENGINES AND ENGINE BASED VEHICLES...

NARAKU VARIATOR CONTROL SHIMS FOR QMB139 50cc

Naraku Variator Control Shims for QMB139 50cc engines. Variator control shims can be installed between the drive faces to lengthen the boss if your variator does not open fully to allow maximum...

NARAKU VARIATOR SHIMS FOR MINARELLI 2-STROKE

 NARAKU VARIATOR CONTROL SHIMS FOR MINARELLI 2-STROKE SCOOTERS  WITH AN 18MM VARIATOR BOSS.   VARIATOR CONTROL SHIMS CAN BE INSTALLED BETWEEN THE  DRIVE FACES TO LENGTHEN...